Disc blades are widely used in the production process of one of the types of cutting tools, basically in the production workshop of enterprises will come into contact with, so the safe operation of circular blades is very important.
Before using the disc blade for operation, you should carefully check to see if each part is normal, and do not use it alone to prevent the blade from popping up. Adjust the scissors gap of the disc blade according to the prescribed thickness of the shearing plate. It is not allowed to cut two kinds of sheets of different specifications and materials at the same time. The shearing sheet is required to have a smooth surface, and it is not allowed to cut the narrower sheet that cannot be pressed; the fingers fed by the disc blade operator should be kept at least 200mm away from the scissors and away from the pressing device. The waste generated after the operation is angular, and the operator should remove it in time to prevent stabbing and cutting. The above points are the key points that should be paid attention to in the basic safe operation of disc blades.
The safe operation of disc blades plays an important role in industrial production and efficiency improvement, so operators need to be proficient in these knowledge to prevent unnecessary losses, but also for their own safety.